Light steel keel gypsum board wall how to fight line?
Put an end to the traditional gypsum board system without fixed point of the construction of the air, playing screw screw blind fight phenomenon, but also to ensure that the gypsum board system noise, fire and other excellent performance is not reduced due to poor construction, and completely solve the gypsum board system Due to keel, screw site construction uneven spacing caused by uneven internal stress and construction is not standardized and the quality of engineering problems.
Bayer positioning point gypsum board without boring line, in accordance with the national construction specifications in advance in the gypsum board construction surface accurately set the construction and installation of positioning points, to achieve the factory positioning, positioning accuracy, the construction site does not need to artificial artificial line positioning, Direct use, high efficiency, short duration, supervision and acceptance work simple and clear
This is just to find the vertical line on the line, first from the side of the wall, in the amount of a size, point a point, and then let the line down this point down to the ground, the other person to see the following line , In the ground point of a point, and then on the other side of the amount of a size you want, according to the above method on the ground and then point a point, and then on the top of the two points on the top line, the following two points bomb The ground line, and then the above points and the bottom points on the wall. If it is to the top of the partition, do not consider the level, only consider the vertical on the line,
