Gypsum board after the ceiling how to brush white ah?
Gypsum board ceiling:
1, the use of light steel keel according to the design requirements, or modeling or put down the light steel keel,
2, the gypsum board with self-tapping screws fixed on the dragon skeleton,
3, oil workers use anti-rust paint will be fixed by a point brush,
4, the use of elastic putty gypsum board and gypsum board patchwork (installation of gypsum board, the patchwork must stay 8-10 mm gap) leveling, naturally dry.
5, with a special gypsum board sealed with a latex paste paste in the gypsum board and gypsum board patchwork, naturally dry.
6, and then putty after 2-3 times leveling, grinding process until the smooth and smooth,
7, brush the first series of latex primer, naturally dry.
8, in the rolling brush 2-3 times the latex finish can be.
Gypsum board to do the ceiling is the most common way to ceiling If you do not understand it, then install their own gypsum board ceiling will be a very difficult thing, I was an interior designer I was looking at someone else to decorate my house, Although I understand the ceiling of the copy, but tell the truth really want me to get started or not, after all, workers are working for many years anyway on their proficiency on top of us, so I suggest you better or not cheap, Ask the workers to do something better, because this project is very troublesome. As for the step upstairs that has been more detailed, as you said the patchwork at no trace can be used kraft paper sticks in the patchwork.
Bought gypsum board is really not white.
Carpenters to seal off the gypsum board, the paint should be anti-rust paint off, and then putty paint latex paint.
This is the finished product, which is the white top of the people you often see.
