Loader operation detailed method
7, prohibit manipulation in the direction of the inclined ladder, if necessary, should be adjusted in the open inclined ladder, open up.8,After loading, block the loader's tires with a wedge and secure the machine with ropes.When loading must not come to car, stepping on the brake throttle arm unless in neutral, should go to the front when the throttle, speed is slow but also a touch on the brakes arm backhoe unloading, a long time to master.
3, small loaders, loading, unloading, before the ladder under the transport truck tires, the lower pad wedge.4,The used ramp should be of sufficient length, strength and width to ensure a safe loading slope.5. Make sure the inclined ladder is fixed, and the surface of the two ladder should be in the same plane.6,Make sure the ladder surface is clean, free of oil, grease, ice, and loose material. Get out the dirt on the tire surface of the loader.
Step:1, small loaders often have potential hazards during loading and unloading, and should be especially careful. Loader crash, unloading, the engine should be low speed transmission, the machine should be low speed.2, in a solid and horizontal place, loading and unloading, and roadside to maintain a certain distance.
