Microcomputer control switch ZYT10 how to adjust the time
6. After the timer is set, press the "timer" button to check the timing of each time, and then set the "- -: - -" pattern on the display. Set whether the situation is consistent with the actual situation, if not consistent, please press the school, school, school 8. Press the "AUTO / MANUAL" button to change the "▲" symbol at the bottom of the display to "the" "" button, and then press the "Clock" key to make the display display the current time. Automatic "position, at this time, time and space to open the light according to set the time to automatically open and close the circuit. If you want to use the process of opening and closing the circuit, you only need to press the "automatic / manual" button to "▲" symbol to the corresponding "open" or "off" position
3. Press the "time" button, then the bottom left of the display appears "1 off" words (that the first off time), then press the "school week", "school", "school" Enter the desired closing date (note: the date must be related to the date of opening) and time; 4. Continue to press the "timer" button, the lower left of the display will display "2 open, 2 off, 3 open , If you do not need to set 10 sets of switches every day, you must press the "Cancel /" button to set the switch, (Not 00:00)
1. Check the clock display whether the current time is consistent, if you want to recalibrate, while holding down the "clock" key, respectively, hold the "school week", "school", "school" key, the clock transferred to the current Accurate time; 2. Press the "timer" button, the bottom left of the display "1 open" words (that the first time to open). And then press the "school week" to select the six-day work system, five-day work system, three days of work, the same daily, different daily work mode, and then "school", "school" key,
1, time adjustment
Before using this product, please check whether the clock display is consistent with the current time and calibration.
Press the "school", "school", "school week" button, the clock will be transferred to the current accurate time, date (day of the week)
2, set regularly
If you set the error or cancel the setting, press the "Cancel / Resume" button to display "- -: - -"
(That there is no timed program, not "0 0: 0 0"), then press once to restore the original settings.
Work mode: the same day, different daily, one hundred thirty, twenty-four six, six, one two three, four five six,
One two three four five one hundred thirty four five six.
Set the time to open, it must be related to the time corresponding to it.
3, check: press the "timer" button to check whether the set time is correct;
4, modify: find the timing set error, first press the "timer" to the timing time, press the "Cancel / Resume" button to clear, then press the "school", "school", "school week" to reset ;
5, the end of the check: press the "clock" button to end the timing settings, back to the clock running state.
6, manual control: press the "manual / automatic" button, you can achieve the load on the manual switch control.
