Microcomputer time control switch how to adjust the time
2.8 Press the "Time" button, then press the "Week" button to set the same daily, different daily, Monday to Friday the same, Saturday to Sunday the same set.
2.9 When the microcomputer timer in case of failure, the manual switch can be closed, so that the control circuit in the manual state to power, to ensure that the load normal power supply.
2.6 When connected to the power supply, the green light on the panel indicates that the circuit is energized and the traffic light is on to indicate that the switch is on.
2.7 Press the "Auto / Manual" button to open or close the circuit directly. To make the switch automatic, press the "AUTO / MANUAL" key to change the "▼" symbol below the display to the "OFF" position, then press Press this key to the "automatic" position For example: every night 18:30 automatically open, according to the above 2 points set as shown in Figure 3, every night 23:20 automatically shut down, according to the above 3 points set as shown in Figure 4 , According to the fourth point of debugging on the LCD (2 open, 2 off ... 10 open, 10 off) is displayed as "-: -" pattern, then press the 6th point, 7:00 to operate.
Second, the use of methods (using the timer function, please hand switch in the open state)
2.1 Adjust the clock (the factory has a good clock) If you need to re-adjust the press the "clock" key while holding the "school week" button, "school" key, "school" key.
2.2 Set the first time to open: Click the "timer" button. LCD screen appears (Figure 1) state, then press the "school" key and "school" health, enter the first time to open.
2.3 Set the first time to turn off: Click the "Timer" button. LCD screen appears (Figure 2) state, then press the "school" key and "school" health, enter the first turn off time.
2.4 continue to press the "timer" button, the LCD screen appears "2 open, 2 off ... 10 open, 10 off" reference steps 2 and 3, set the time after the opening and closing, if Only once a day and off once, you must press the "Cancel / Resume" button, "2 open, 2 off ... 10 open, 10 off" the storage time to eliminate, so that the LCD display "----" pattern.
2.5 timing is set, should press the "clock" button, so that the LCD screen shows the current Beijing time.
