Home > categories > Security & Protection > CCTV Camera > Monitor how the camera is connected
Question:

Monitor how the camera is connected

Monitor how the camera is connected

Answer:

3. How to use the network cable to monitor the camera to save costs. Twisted pair transmitter generally refers to the use of cable to transmit video equipment, twisted pair transmission using differential transmission principle, the video signal will be converted into the same amplitude, the opposite polarity of the video signal, through the twisted pair transmission, The two ends of the opposite side of the video signal subtraction into a normal video signal, it can effectively suppress common mode interference, even in strong interference environment, its anti-jamming capability is better than coaxial cable, and through the Video signal processing, the transmission of the image signal than the coaxial cable is clear, the same network cable will not interfere with each other.
2. How to use the cable connection to monitor the camera cheap. The price of the ordinary ultra-five cable is quite comparable with the 75-3 video cable, the outdoor waterproof super five cable prices are comparable with the 75-5 video. VGA cable (also known as VGA cable, signal line, image transmission line), is used to connect the host computer and monitor. The general minimum length of the standard shall not be less than 1.5M, without both ends of the thread. The market also has 1.8M, 2M, 2.5M, 3M, with a host computer, these lengths are generally used for foreign customers. The maximum length of the VGA is not a uniform standard, how long do you want to do to give you how long to do, of course, the line is too long, the impact of image transmission. Moreover, the price is very expensive, the maximum length can do 30M has been very good.
1. Monitoring camera is a professional video surveillance equipment, but the professional monitoring equipment is also necessary to connect the professional cable? Of course, only with a professional transmission cable to achieve the best results, but in the requirements of the quality is not necessarily a hundred points with the network cable can also monitor the transmission of video, then how to use the network cable connection monitoring camera? This article will be for how to use the network cable to connect the surveillance camera and the network cable to connect some of the advantages of the camera to do a simple introduction for your reference. How to use the network cable to connect the surveillance camera wiring convenience, cable utilization is high. An ordinary super five cable, there are four pairs of twisted pair, you can simultaneously transmit 4 video signals, or 3 video, 1 control signal; and cable lay better than coaxial cable laying.

Share to: