Home > categories > Automotive & Motorcycle > Motorcycle Brakes > Motorcycle brakes are not always where the problem is 25
Question:

Motorcycle brakes are not always where the problem is 25

The brakes are pinch in the end no effect I tighten the brake line after a good point but after a while it will restore the original state of the motorcycle is the Neptune pedal

Answer:

Brake rocker stuck, connecting rod sliding teeth, free travel too much, brake pads wear, broken cable, brake drum dirty ... and so on
Mainly brake wheel wear, and change the brake pads can be resolved
Scooter rear brake is not working, in addition to check the brake shoe is a large wear or material is not good, brake arm angle and brake stroke is normal, and whether the wheel brake pad wear, there is a relatively easy to ignore the reason is the brake line , Usually adjust the brakes, there may be due to the brake line attached to the sand, twist the nut when the brake line into a spring-like, then do not have to brake when the brakes will appear appropriate and tight, but when forced to brake Will not make the best, it is best to remove the brake line after the check, if the brake wire of the wire is loose or spring-like, for the brake line and re-adjust the brake on it.

Share to: