take out the effect is not good, please master under the guidance of what the problem isIdeally, the pictures that come out like this are clear and texture, but I can only take pictures of this effectWant to ask what is the problem, please master with your light is wrong or camera settings, the camera has been opened in the P file, please show me how to light the camera, how to set up, thank you!
Aperture priority, aperture on F8, the general lens are the optimal imaging in F8; the late PS to adjust the color, contrast, sharpness and so on, the effect will be enhanced. I don't know what to say about flash lights,
Do not use the P camera lights, must use the M fileSet the aperture as far as possible between 8-11. Shutter speed 125.Then adjust the light output to the proper exposure.Two lights with Softboxes cross light on the line. About 45 degrees.You can't shoot the texture. The first one may be a problem with the shutter settings. It's a little bit mushy. Another is that your aperture may not be reasonable. You can set it according to what I said. It must be a good time to notice the racket.There are different fabrics, fabric texture is different.
You know, when you use a flash, the aperture controls the exposure, not the shutter. So, when the shutter is fixed at the sync speed, you can change the aperture and try the exposure... The lighting angle and distance, this depends on your actual situation, location and intensity of your flash lamp to control a specific effect can see other lights... In addition, you may have larger aperture settings, or up and down on a flat surface, resulting in a shallow depth of field... Two lights are about a 45 degree angle is flat design, is not conducive to reflect the fabric texture, you can transform the perspective of try, general side light is easier to reflect the fabric texture... There is a soft light box is not omnipotent, then the best reflect the texture main light is hard light... Also, you use this picture P file is the consequence of no flash effect, seemingly just by modeling light exposure, the color can be seen from the picture color temperature is relatively low, not more than 5600K flash effect... Also, although the aperture 8 is theoretically a better choice, the flash will depend on the distance of the subject and the brightness of the light. Otherwise, it will be overexposed or insufficient...
First of all, the use of flash words do not use the P file, it is best to use M files, because the camera's P file is not identified with the flash P file only that automatic combination of aperture and shutter, automatic identification machine only lamps and lamp factory TTL exposure. He won't be so smart with extra lights. See your picture, is the lighting problem, and focus on the collar, the fuzzy, focus must be accurate. More testing, the main light and auxiliary light have light ratio, that is, the main light auxiliary light brightness or distance should be different, you can see in the case of modeling lights. The shutter is set at the synchronous speed, usually 60 or 125, not more than 1/200 seconds, with the aperture control exposure. If the light ratio is not appropriate, you can adjust the distance adjustment of the two lights... PS is later, but the premise is that the early stage must be good, otherwise it will be difficult to do later, and that will only play a supporting role
