Oneself how to remove the air conditioning?
Are you want to tear open outfit? Suggestions don't yourself, looking for professionals to help you. Because the teardown charge fluorine, installed pumping air into vacuum state, even if you don't understand it against air conditioning...
The first thing to do is accept fluorine, let air conditioning in the refrigeration condition, then close the high-pressure tube (these operations in the seg), such as 10 seconds to 20 seconds and then shut down low pressure pipe (bull). Close after shutdown disconnect the power supply. The inside and outside the machine on the outdoor cable. Brass. Pay attention to is the place of copper tube bending slowly straightened, wrapped the nozzle to before it. Should be easy, just outside the machine a bit heavy, need to pay attention to. If you don't hurt, and it's dangerous and outside machine place, suggest that you should call a professional to do it. Don't save some money.
Before the removal of air conditioning, the first to will be received in the seg refrigerants in air conditioning, and then remove the connection between outdoor and indoor machine in air conditioning copper tube. The again. Remove the outdoor and indoor machine one by one. And packing is good, the outdoor and indoor machine interface in order to avoid dirty interface. Especially when removing separate-bodied air-conditioners should pay attention to safety!
First of all, it is necessary to suggest that you should pay attention to safety, below will introduce the steps of air conditioning: 1 > normal temperature above 17, open the air conditioner to refrigeration temperature is set to the lowest when air conditioning normal boot, 2 > opened by the adjustable wrench counterclockwise 9 of 12 inches high and low (fine) pressure pipe valve blocks, 3 > with Allen wrench clockwise turn off high (fine) pressure pipe valve, three to five minutes. Turn off a Allen wrench is low (coarse) pressure valve, instant shutdown, unplug the power supply socket, 4 > with 12 inch wrench counterclockwise removing the high and low pressure pipe (either one is fine) note no water in the copper tube and dust, 5 > remove the connector cover, tear down from indoor machine of the power cord, 6 > remove outdoor (note that this time must pay attention to their own safety and the safety of others) 7 > two people cooperate to take on indoor machine and tube and metope hangs Taiwan > 8 each interface sealing of air conditioning. By the way, if the ambient temperature is lower than the 17 degrees (winter, for example), you need to unload the thread on air conditioning four-way valve. Can according to the above steps to accept the removal of fluoride and normal. To put the freon received outside the machine don't have broken copper pipe bend
