Ordinary white LED lamp can be used as LED lights plant it
The benefits of white light are good for interior plant landscapes, such as plant walls and cylinder plants. Meet the needs of human vision. The plant lights are red, blue, and purple. Although the utilization rate of plants is high, the human eye seems uncomfortable and unnatural. Therefore, there are limitations. Used for production and for cultivation. The appreciation of the beauty of the plant landscape is out of the question. White light gives a good balance between 2 requirements: plant landscape and plant photosynthesis. It also has its use of martial arts. Different needs, use different lights.
According to my experience. The lamp is about 1 meters from the plant. To take care of 1 square meters of plants, you need 200 watts of white LED. If you have a lot of plants and place a lot of ground, you need to increase the number of lights. The light was fading because the lights were far away. Be uniform, and shine widely. When the plants are in plenty, the electricity consumption is obvious. The cost is high. Pay special attention to power problems. Think of 1-2 tiles or a ten watt LED bulb that will solve the problem, and that's not good. Unless you have to rely on plants near the lamp shone. Be careful with the heat.
You can achieve the same effect as a vegetable light by increasing the amount and power of the white light LED. But it needs to be explored. LED plant lights are much more expensive than white light, so that's not necessarily a big difference in cost, other than electricity. Electricity is indeed a relatively large expenditure.
Can, in the case of insufficient light can use white light LED. Only the utilization of light, no plant lights, the utilization rate of plants is high. At the same power, white light consumes a lot of energy in the light of other wavelengths that the plant can't use. The light produced by plant lights is basically the wavelength of the light that plants can use. That's the difference.
