What are the components of the LED underwater light source?
Whether it is installed (scaffolding underwater lamp) or installation (embedded underwater lamp) should be reserved for cable 0.6-1 meters long, to avoid future lighting problems, need to drain the water in the pool, so even if the lamp is broken, water from the lamp can be put on the surface of the water to mention doing waterproof treatment with changing connection and wiring
The isolation transformer and the leakage switch which are supplied by the underwater lamp must be arranged outside of the 2 area so as to avoid electric shock
The last one to use 5630 beads, each 0.5W, usually used as a floodlight (such as lamp, lamp panel, Mian Guangyuan), the lens is relatively small, with a kind of light diffusion plate.
The front is the use of generic lamp lumens, each 1W lamp, this is cheaper, and better use of the lens (i.e. concentrating effect of point light source), at the bottom of the water is relatively good
Antistatic measures should be made. LED underwater lamp products to adopt certain anti-static measures, in the process of production and installation such as bench to ground, workers should wear anti-static clothing, anti-static ring belt, and belt of anti-static gloves, conditions can install electrostatic ion wind machine, but also to ensure the installation the air humidity is about 65%, in order to avoid the air is too dry to produce static electricity. In addition, different quality grades of LED anti-static ability is not the same, the quality of high grade LED underwater lamp antistatic ability better.
