Please enlighten brother snow reamer 150125110 motorcycle valve is not universal and how the hinge valve
If you are a car should know how much money you don't need to change itTo hinge the valve, one is trouble, two is time spent more, in addition, after the hinge, the quality is not absolutely guaranteedAs the car is definitely so simple to make money do try not to engage in some trouble things a car down half lost there costs time and effort as a direct change covering more simple
Valve reamers are now less used, and if the ablation is not severe or has some ablation, direct grinding can be done, preferably without use.
Motorcycle valve reamer is a set of the above several cars can be common.Reaming the valve is the best way to find a local repair car or motorcycle master, which is not clear here.Generally use 75 degrees, then 15 degrees and 45 degrees of reamer, and finally the effect after reaming, and then use several tools to trim. Use 45 degrees to the right contact width of reamer, reamer can take 15 degrees contact hinge low 75 degree knife to contact surface to improve the contact surface, preferably 1 mm or so, if it is too wide for 15 degrees and 75 degrees of cutting narrow. After reaming, grind the valve and check the seal.
