Precipitation of titanium plate.
Internal stress with stainless steel and the like, are relatively large, the final pieces may have to be subjected to stress annealing treatment, otherwise it may crack, the other with stainless steel is not much difference
The thicker the thickness of the material forming the worse the effect, this is nothing to say, the material thickness of what can not easily change
As well as on the burr and small incision, small cracks and so very sensitive, easy to split from these places when forming, that is, after the need for these burrs in these areas to be polished in order to carry out the forming process, so the original parts of the edge More sharp place seems to have to consider to change the arc transition, help to improve the life of the edge is not easy to crack, specifically how to change, of course, also need to shape
Light drawing deformation can also be, so the drawing die and the like should not do anything to change, but some rounded corners may be appropriate to enlarge a little, after all, it is not good plastic steel, easy to shrink cracking, of course, the existing mold The surface hardness is to meet the requirements yet to be investigated, not have to be plated.
Bending performance is relatively poor, so to consider changing the corners of the fillet radius, zoom or shrink to see your parts, enlargement In order to prevent the outer cracking, shrink in order to rule the rebound,
