PVC wood-plastic board Saw cut out of the board is not rectangular, sometimes parallelogram is sometimes how to adjust the trapezoid
Open material error value ≤ 0.2, diagonal error value ≤ 0.2
Can not be directly by hand to the rotation of the saw blade next to the object, if necessary, can be used to other long auxiliary materials to open and then take.
, the preferred work before, will push the table around the cleaning and cleaning table.
2, check whether the sharp blade, the size of the blade is in a line
3, the test machine: time about 1 minute to see whether the normal operation of the machine, check the size of the blade rotation direction, to ensure that the blade rotation direction is correct.
4, start work, will prepare the plate on the push bed, adjust the stall size. Then start working.
5, to maintain the PVC wood-plastic plate placed straight, no bending plate,
6, the plate should be close to the block, can not move;
7, according to the thickness and hardness of the plate to adjust the opening speed, the machine will be advancing uniform, not too fast too fast.
8, such as out of the board corner is defective, should consider replacing the saw blade.
9, open a small material, the application of wood to push forward.
