Regulations for the use of electrical insulating safety shoes
The product should be careful not to damp, after damp is prohibited to use, once damp, placed in ventilated, ventilated, shade place, natural air dried, so as to avoid deformation of leather shoes. After the shoe sole is punctured by foreign bodies, it can not be used for insulating leather shoes.
Pay attention to the maintenance of leather shoes, shoe polish frequently brush. The cleaning method is: wipe the dirt on the surface of the leather shoes with a clean soft cloth first, then put the shoe polish on the cloth and apply it evenly on the vamp, and then wipe it after a while (after the shoe polish is slightly dry).
Insulated shoes should not wear in the rain, but not washed, otherwise prone to breakage, degumming, bleaching, pan efflorescence phenomenon.
Insulation shoes are suitable for use in power equipment under AC 50Hz, 1000V or under 1500V, and are worn as auxiliary safety equipment and labor protection articles when they work. Staff in the use of insulating shoes, with the essential tools of touch live parts, and can be used for the protection of the step voltage caused by click. Step voltage refers to electrical equipment grounding, in the direction of maximum potential between the ground potential gradient 0.8M points difference.
Insulated shoes wet or in sweat, prone to pan efflorescence phenomenon. As a result of the pan efflorescence phenomenon, can use gauze or cotton dipped in a small amount of warm water, wipe the upper white efflorescence, put the shoes on the ventilation dry, and then wipe the shoe polish, repeated several times can be reinstated. So keep your shoes dry.
