Connection: power amplifier and home theater is the 5.1 home theater.Then, all the interfaces of the home theater are connected, and the Bluetooth broadcast with the power amplifier is no different, so that the music can be played normally.The power amplifier connects the smart TV using only one HDMI, which connects the HDMI1 interface.Question: when I play TV with Hisense's smart TV, the Android system switches the power to TV mode. The TV still plays its own voice, and the stereo doesn't sound. Then, in the TV still play colleagues, replace the power amplifier play mode, with DVD, then the sound began to play DVD sound.Personally feel: HDMI1 interface connection power amplifier, whether or not only in the TV signal source HDMI1 to normal use of power amplifier music?. That is, smart TV doesn't make a home theater (because the TV default Android system is on TV, signal, analog TV.)Find the correct assembly method!
HDMI digital connection, because of the limitation of copyright fee, most TV manufacturers only provide HDMI input function, and they don't provide HDMI output function. You can see if your TV manual has the HDMI output function, that is, the function of HDMI to the power amplifier. If yes, after the connection, you need to select the HDMI output settings through the remote control, if not, there is no such set function. This is because the digital output of the HDMI is the original, the original is easy to copy, so copyright encryption protection, but need to be original, must pay a fee to decrypt the original, is very expensive, the cost increased so many TV, TV manufacturers, the use of most of the HDMI interface for input function no output function.To make the TV audio input into the power amplifier, it is very simple to find the red and white (audio) output jack of the TV, and connect it to the red and white input jack of the power amplifier. When you play, please set the power amplifier on the mode from the TV input, so there will be a sound. For example, from the TV audio is inserted in the power amplifier "CD / IN", then, the input mode of power amplifier to select CD mode, only the sound of television.
Your connection should be correct, but each person's understanding and use of the home theater is different. Power amplifiers do not switch in place of television, that is, when you connect with HDMI, the mode of power amplifier selection should be HDMI, not TV mode. Because, at present our country's TV TV does not have the 5.1 channel transmission function, transmission is standard R, L channel, so switching power amplifier TV mode should be turned off 5.1 decoding, enabled 2.1 decoding means, and automatically switch to R, L input mode, so, turn off the HDMI interface of course, there is no sound audio amplifier. In addition, it can not be understood that the power amplifier switches to TV and the television is under control. TV in the home theater system, just play the role of the display, and is independent of the power amplifier remote control, to transform TV, can only be remote controlled by television. Just a little bit. When the TV is on normal, please switch the power amplifier to HDMI mode, and there will be a sound. And home theater 5.1 effect is based on your DVD movie and the function of the machine to achieve, TV still play the role of DVD image display only.
The Android system of TV set is very slag, and the playback effect is not good. What's more, the TV does not have HDMI output, and only analog sound source output, so the sound quality will not be good.If you need to output the TV sound to the power amplifier, you should find the interface of the audio output behind the TV, input it to the power amplifier and switch to the corresponding interface. But it's a stopgap.If the effect is good, recommended to buy hundreds of pieces of special player, player HDMI output to the amplifier input HDMI power amplifier, HDMI output and output to the TV, so as to truly perfect display of the system effect.If unknown, please ask
HDMI1 no voice is correct, he doesn't have audio. You can only plug in the power amplifier. Just like the VGA line that connects the computer case, where does the power amplifier need to be connected to the chassis?. If you want to make the TV sound, you must connect the audio to the audio on the TV
