Steel braced steel purlin and anchor beam waist connection
Disclaimer: about the steel braced steel purlin and anchor beam waist connection should be clear in the construction scheme, construction technology scheme. In order to ensure the safety, the force and the state of the joint shall be determined by calculation, including the diameter of the anchor cable, the material requirements and the safety factor, the welding seam height, etc.. After the establishment of the technical scheme, the technical department should be organized to discuss the special measures to ensure the safe operation of the project, and it should be implemented in accordance with the procedure. Reiterate: before the construction of a variety of resources are fully prepared, the construction should adhere to safety first.
Steel braced steel purlin and anchor beam waist can be connected in the middle and upper part of steel purlin two outer waist beam on the peripheral ring with holes in the wall of steel plate welding joint waist beam respectively, and vertical welding, with hole spacing of gusset plates should be set corresponding to the number of cables,
Depending on the distance between the main direction of the water should be fixed, the mainstream water should be encrypted when large. The anchor cable is connected with the joint plate with holes.
