Switch socket a long time how dirty dirty
Moves five:
In general, wet or near the water area of ??the socket need to install moisture cover, such as: near the sink, washbasin socket, kitchen, bathroom wet area socket. This can not only prevent water vapor and oil pollution switch socket surface, but also an important measure to protect the safety of electricity.
Moves three:
Internal cleaning, key switch or socket, dust may be through a small gap or the socket hole into the switch to the inside, if you want to clean the inside, the premise is to close the gate, and then open the front cover, preferably a small brush inside the sweep The dust, do not use water to clean or use very wet things to wipe, this is not safe, clean with water may be difficult to wipe dry, wait until after power may have security risks.
Moves four:
Switch socket cleaning in the weekdays may often be used, then if the pro is worried, or do not want to clean, it is best to paste a thin switch stickers, both beautiful and can protect its clean.
Moves one:
Before cleaning, turn off the gates, wipe with a small amount of low-concentration (70% -75%) alcohol with a dry cloth, avoid cleaning with water, not only the water mark, and the risk of electric shock.
Moves two:
The appearance of the wipe to be a little bit, the key switch next to the gap is a dust collection of a Kai angle, is more difficult to clean the place, you can use a small brush gently sweep out the dust.
