Technical requirements for LED street lamps
The average illuminance of illumination uniformity (uniformityof, road, surfaceilluminance) is 0.48, and the spot ratio is 1:2.5. accord with road illuminance. The actual 1/2 center spot reaches 25LUX, and the 1/4 center light intensity reaches 15LUX, the minimum light intensity is 4LUX at 16 meters, and the overlap light intensity is about 6LUX.6., it has a very good application prospect in the new city lighting. Dimming for depth, and colors and other features are not subject to dimming.7. meet the humidity: less than 95.
Market street lamp lens material for the improvement of optical materials, transmittance is more than 93%, high temperature -38 +90, anti ultraviolet UV ` etiolating rate for 30000 hours without change.3.LED street, the main lens for LED street lamp, spot is rectangular, the material is PMMA optical material, transmittance is more than 93%, high temperature -38 +90, anti UV UV ` etiolating rate for 30000 hours without change,
The technology is mature day by day, and the efficiency of light source has reached over 100lm/W, which makes it possible to save energy in urban street lighting. LED street lamps, especially large power LED street lamps, are attacking the traditional street lamp market at a tremendous speed.High power LED street lamp, as its name suggests, is power greater than 30 watts, using a new type of LED semiconductor light street lamps. The standard is generally the illuminance uniformity of the road surface, which conforms to the illumination of the road. The actual 1/2 center spot reaches 25LUX, and the 1/4 center light intensity reaches 15LUX, the minimum light intensity is 4LUX at 16 meters, and the overlap light intensity is about 6LUX. Refers to the use of solar panels for the supply of power LED street lamps. The conversion rate of 1. light is 17%, the solar energy per square meter is 1000W, and the actual utilization efficiency is 170W
