The air compressor not only inspiratory, expiratory pressure is how one thing, not up
The cause of the air compressor is not only your main inspiration:1 、 the intake valve is not loaded.2, the intake valve does not uninstall.3, the solenoid valve is not good.4 、 air filter is not good.The solution is as follows:1, the intake valve is not loaded, it is possible to control the loading and unloading module, that is, the control valve to control the intake valve closed, resulting in non intake. Modules for control, load and unload need to be replaced.2, the intake valve does not uninstall, then the intake valve may be blocked inside the hole. You need to clear the intake valve, Li Amin's bore, and other valve plates.3, the solenoid valve may not get electricity, or solenoid valve coil damaged, you need to replace a new solenoid valve coil.4, the air filter filter effect is not good, the intake valve spool sealing surface adhesion impurities, resulting in poor sealing, the need to remove impurities, as well as the replacement of a new air filter.
Inlet filter cartridge is blocked, there may be electromagnetic valve is not good
The possibility of the intake valve plug is! But the most important reason is probably the lack of piston ring seal! You check the base in the crankcase oil level is too low! Can also be from the air inlet one-way valve sheet to drip a little oil! If the pump is in the crankcase oil level is too low!
