The bottle cap can not be screwed. What shall I do?
If it is a jar, you can reverse the bottle, take a few shots, and then try to unscrew it, it will be easier. The ice machine on what I think we can use hot water wash and then tighten the master it should have little difficulty... Unless your strength is small... The ice maker since you try so many times are not open, probably because the lid to remove the water bubbles. The best. I suggest you don't cover it if you open it. When you use it, don't tighten the lid.
With the scissors tip in the lower edge of the bottle, gently pry it. You can feel the gas discharge noise. How to open the bottle is still not open to open the bottle with hot water soak and open the soda bottle if you try to cover plastic scalded with boiling water,Or a slap in the bottom of the bottle with hand twist the most stupid teeth should lower the temperature by using the principle of pressure screw die too if it is classified as friction principle with great force so I suggest you take a pat on the bottom of the bottle or rubber gloves with hot water soak by conversion of the interaction, tightly hold the bottle, and the bottle body can rotate. It's OK to use a spoon to beat a few laps along the bottle cap, but not too much effort. A uses the lever principle: a medium wrench, a small towel, and a cap (the longer the wrench, the less effort)
Spoon the card to open the beer under cap with that but not directly open. Just put some gas, and then wring their hands under the pull!
