The cabinet door hinge on the screw from sliding to do
The installation of spring hinges requires a hole in the cabinet door. Once the wall density plate hole expanding Susong, unless there is a special opening device, there is no way to move the original installation position.
Buy a flat spring hinge without opening and install the hinge in the new position.The void is the original smooth silk, playing a larger space with a large drill, a diameter of about 8-10mm, and then the small wood cut into slightly larger than the hole of the wedge, the wedge son beat into new holes and tension (suggestions can be applied to some woodworking glue), then the self tapping screw nail. In the wooden wedge, and again fixed cabinet hinge.
In the original screw hole density plate under the condition of Susong, holes will continue to expand, cannot continue to maintain the close up effect of self tapping screw up.
This is a fairly common and difficult problem to deal with. With the use of household cabinets over the years, almost every household can encounter such a situation.One of them. Due to quality problems, there may be a high humidity and use, the actual situation of the influence of temperature, density board will inevitably and Susong deformation etc..Second, the cabinet door is mostly used in spring hinge, hinge with self tapping screw connection plate on the wall. When the spring hinge is opened and closed, the self tapping screw used for fixing has certain pull out effect.
