The compressor sounds great when it's working, but it doesn't ring when you hold it with your hands
Refrigerator placement requirements:1, the refrigerator should be away from the heat source and avoid direct sunlight, so as not to affect the performance of the refrigerator;2, should be placed in a well ventilated place, around the refrigerator, including back, should leave more than 10CM of space;3, do not put in wet or easily splash place, water and dirt splashing should promptly wipe clean with a soft cloth, to prevent rust and effect of electrical insulation properties;4, do not place in too cold (below 5 degrees Celsius) environment, also do not use outdoors;5, the refrigerator should be placed in a strong ground, if you need to pad high, but also choose a smooth, hard, non flammable pad, do not put the refrigerator packaging foam pad used to pad high refrigerators. If slightly unstable, can adjust the refrigerator in front of the black adjustable foot.
The two feet in the back of the refrigerator can be adjusted. If you don't make a steady sound and vibrate, you can adjust the back foot until it is smooth. If you haven't solved the problem, ask the repairman to check it out
The problem that the landlord reflects is obviously caused by the local resonance of the refrigerator,Terms of settlement：1. Please remove the refrigerator and fully see the compressor on the back of the refrigerator2. If the back of the refrigerator is equipped with a mouse proof net, please remove the netAround 3, check the compressor refrigeration pipeline is very close, will rely on the pipeline between very close with a little bubble shock, or forced to separate light pipe, if it is not separate or small tube is very much tied together, then find a stout rope tied to them to fasten together.Finally, to restore the original position is good, the so-called refrigerator must be transferred to the level, it is a cloak, as long as the refrigerator does not sway to OK
