The cooker indicator is always in thermal condition
When removing the trouble, adjust the distance between the insulation and the contact on the lever. Such failures are common in electric cookers replacing switches, assemblies, and magnetic steel.
Open the bottom check, the lever switch contact is not good, after adjusting the power supply, the rice cooker is working normally, but when the inner pot is put into the pot body, the fault is renewed. Check the switch contacts again and close well. The electric cooker is placed up, when the inner pot into effect, the downward displacement in the magnetic steel production and its own gravity, lever switch insulation sheet and switch moving contact distance is small, the contact is separated, so that the electric cooker can not work normally.
When you press the lever switch, magnet can pull the electric cooker into the insulation state, at the end of the magnet steel shed, not bad.
The magnetic steel switch (main contact) is out of contact or has no contact at all. You did it the way I said, not only the problem, but you've been the expert in solving it. The electric cooker with the knife under the flip, the bottom cover, press you to cook rice that button, you will see the interior has a contact with you in the press the switch, the contact is open contact pay magnet dry, electric cooker when cooking electric disc on which all turned on work, you can polish the small file contacts, no file with a knife scratch the contact line, to ensure the good contact on the line. If the key for cooking is not touched, the tool can be adjusted to contact it. Don't tamper with other people who have not told you. All right, put it back and cook it! You can cook delicious food.
