The electric kettle is broken. After opening it, I don't know where it is broken. Somebody show it?
You open the base, there should be no problem, the kettle is the most vulnerable parts of the heating water heating parts, repair costs as well as directly from the new one, probably about 50 yuan will be able to buy one
First of all, such a situation is not recommended to repair its own, and make it impossible to fire and other accidents!!!Professionals are advised to replace the following components as a whole.The cause of the failure is:Then remove the 3 nuts, following a double metal sheet to prevent dry burning, a ceramic column top open contacts, where fault.Generally because the use of a long time, resulting in the contact of plastic seat heating variant of the contact can not be touched, the kettle circuit is blocked.
1. turn on the power, the indicator is not lit, check the power line is intact. 2., open the handle shell, check the thermostat contacts and switch parts because of water and rust, resulting in poor contact, if the water is rusty, you can wipe off the corrosion part, so that it is in good contact. 3., the use of water can not be too much, otherwise the water will overflow into the handle after corrosion, damage to the device. 4., check the above second key points, the worst possibility is bad here. 5, this electric kettle is not expensive, if the bad serious, there is no repair value, simply replace the new, both safe and easy to use.
