The new purchase is hot water, and now it's ticking. Cold water is normal. It's not a scale problem. Some people say it's a tube inside
Don't worry about it. There are two kinds of cases. One is that the hose is blocked with scale, and the other is that there is no air in the hose, which leads to a small flow. The solution is to take the bucket down and open the drain valve at the back and drain off the water. After that, turn on the front hot tap and plug the drain valve behind. Turn the bucket under the condition that the hot tap is turned on and wait until the hot tap is out of the water before turning off the tap. In this way, the air can be pushed out of the tap by the water and the water will flow smoothly.
If it's not scale, there's air in the hose that doesn't drain out, causing the water to flow very small.The solution is to take the bucket down and open the drain valve at the back and drain off the water. Then turn on the front hot tap,The drain valve at the rear is blocked. Turn the bucket under the condition that the hot tap is turned on and wait until the hot tap is out of the water before turning off the tap.In this way, the air can be pushed out of the tap by the water and the water will flow smoothly
The inside of the pipe is a high temperature resistant rubber hose made of similar hospital transfusion, according to your description analysis: when new buy is likely to be a hot water hose or hot water outlet valve of a foreign body within the block, after a period of time using the scale aggregation caused the phenomenon, you can open up is very simple. I've dealt with this kind of problem you've described. I might as well try
