The toilet was removed after the re-installation, flushing, how to re-install it
Do not have to re-install, you have to check what is the reason, the general situation is five reasons:
First: the water pressure is not enough, this situation is more common, the current elevator apartment, the more high to the floor where the water pressure is small, flushing is not enough when the inevitable.
Solution: Add a pressurized pump to your water level home. Cost in a few hundred to several thousand range.
Second: the water problem, the maintenance of this reason is to see your other location of the water pressure enough, if there is no problem, then the toilet may be a place where there is congestion or congestion.
Solution: generally due to the precipitation of water pipes caused by water, it is best to change the inner layer of antibacterial layer.
Third: the problem of water, this is a good solution.
Fourth, the original when the toilet by the structure of the legacy of the problem. Such as whether your bathroom was sunken, whether to change the toilet position, which are likely to lead to gambling
This is to deal with more trouble.
Fifth, the toilet itself. You check the water tank in the valve is no problem. Is to sit the bottom of the export.
How to install the toilet
Toilet seat installed, in advance to draw a toilet seat template, because the toilet is now basically siphon, the following water outlet 10 cm below the ground of the water outlet is small, if it is straight, the following large outlet, fitted with flange to the ground A pressure, basically able to pressure in the middle, but if the sink is small, the workers with their own feeling down when the pressure is sometimes impossible to pressure in the middle, generally have to deviate, so easy to form a flange lax, Sometimes the flange ring will rise, will affect the toilet seat seal, if the seal is bound to leak, is also one of the main reasons for the toilet back taste. The key to the toilet is the seal must be installed, which is essential for the siphon toilet, sealed good siphon toilet, flushed after the formation of negative pressure, which will increase the momentum, washed more thoroughly, red There is a water when the water "嘬" down the feeling, if the seal is not good, not only will return flavor leakage, but also affect the flushing effect, and some will leak.
When the installation, the workers will not give you a particularly accurate to the amount of the outlet, if the toilet is just under pressure in the middle of the ground outlet, so that the flange evenly force, you must play on the ground cross line to find the center line, Also draw the template (1) of the toilet seat. My own toilet is installed, installed and installed before the use of a big difference, although I bought a four hundred dollars is very cheap toilet, but now flush particularly happy.
