The use of car lifts precautions and how safe operation
Lifting machine in the car maintenance and maintenance play a vital role, regardless of vehicle overhaul, or a small repair maintenance, are inseparable from it, its product nature, quality directly affect the maintenance personnel personal safety. In the maintenance of various types of maintenance enterprises, whether it is maintenance of a variety of models of integrated repair shop, or a wide range of business street shops (such as tire shops), almost all equipped with a lift. The following collection and sorting out the use of various types of lifts and precautions:
Car maintenance enterprises in the management should pay attention to safety norms, to understand the safety operation procedures of the lift: 1, before use should be removed near the lift to prevent the operation of equipment and debris, and check the operating handle is normal. 2, the operating mechanism sensitive and effective, hydraulic system does not allow crawling phenomenon. 3, the car, the four horns should be in the same plane, adjust the heel pad height to contact the vehicle chassis support parts. 4, the car, the vehicle can not be too high, after supporting the four bracket to lock. 5, to be lifted after the vehicle into the elevator should be adjusted to adjust the block to move the provisions of the lifting point of the vehicle. 6, when the staff should leave the vehicle, raised to the need for height, you must insert the insurance lock pin, and to ensure safe and reliable before they can start to the bottom of the job. 7, in addition to underwriting and minor repair projects, the other cumbersome cumbersome operations, not in the lift on the operation of repair. 8, the lift can not frequent ups and downs. 9, the car when the lift to be stable, slow down the landing. 10, it is prohibited when the operation lift lift.
Daily inspection: should be carried out once a day, check the fixed wire rope and the visible part of the wire rope. (2) regular inspection: at least once a week by the competent staff. Check the length of the rope: the fixed part of the rope; rope around the pulley parts; rope end fixed device; rope and its fixed device sliding; rope broken wire and corrosion.
