The water heater in the house is leaking from angle valve. Can you change it?
Tolerable。If it is the angle valve inlet, then you must turn off the main switch of water, remove the bad angle valve, the new angle valve wrapped with raw materials, tighten it.If it is the angle valve of the outlet, it must turn off the angle valve of the water inlet and turn off the power to avoid the dry burning of the inner liner. The operation of changing valve is the same as above.
Also don't twist the head, the difference 1, 2 buckles can.Then open the water, hear the water into the heating cylinder, power, open the water valve, check whether leakage.
Yes, turn off the electricity, turn off the water, find a bucket to connect, open the upper and lower water outlet, usually from the drain drain water, the bucket is too small to be connected several times.Angle valve should be prepared in advance with raw materials, wound not too heavy, but must go on, don't be squeezed out screw buckle.
