Three layers of solid wood flooring panel, core layer and the bottom of what are the requirements?
1: core thickness of not less than 7mm2 core width can not be greater than 6 times the thickness of 3, the gap between the core can not be greater than 3mm
1 three-layer solid wood flooring panel thickness is usually 3-4mm or more, with a floor surface layer of material should be consistent. Surface wood requirements are very strict, have a good stability, color, texture and decorative performance for consumer needs. 2 The same batch of floor core layer requires the same or similar materials. 3 commonly used species: poplar, pine, birch, basswood and so on. Common thickness of 1.5 ~ 2.5mm. When the selection of materials to avoid the dead, rotten 笭 arc udie old Li mixing pad some rogue, cracks and other defects. The bottom processing is usually done using a peeling process.
Three layers of solid wood flooring on the surface layer of three solid wood flooring panel thickness is usually 3-4mm or more, with a floor surface layer of material should be consistent. Surface wood requirements are very strict, have a good stability, color, texture and decorative performance for consumer needs. Three layers of solid wood flooring core layer of three solid wood flooring core commonly used species: poplar, pine, bubble, fir, birch, forging wood, the thickness of not less than 7mm. Core slab with the same gap can not be greater than 5mm. The billet is not allowed to have a blunt edge, a serious decay and a resin drain, and the core slabs are free from the voids if the dingmmars are 10mm. Must be filled with the same kind of wood to fill holes or filled with putty. The same batch of floor core layer requires the same or similar materials. Elephant three solid wood flooring core plate selection of the Nordic forest century-old white pine. Texture tough, good stability. Poor quality of the market board using plywood material is poor, easy to deformation. Three layers of solid wood flooring on the bottom of the three layers of solid wood complex Bian floor of the bottom of the commonly used species: poplar, pine, birch, basswood and so on. Common thickness of 1.5 ~ 2.5mm.笭 arc pedicle old Li mixing pad some bite roses selection as far as possible to avoid death, decay, cracks and other defects. The bottom processing is usually done using a peeling process.
