Home > categories > Automotive & Motorcycle > Transmissions > Transmission temperature gauge?
Question:

Transmission temperature gauge?

Isuzu 2002 rodeo sport v6, automatic transmissionCan i find a gauge that can be easy installed without drilling?Can I install some gauge directly into the overfill plug hole or drain plug hole?

Answer:

Any parts store will sell you a temp gage for the transmission, however you don't need it unless your running a race car or a big rig, you can even get rear end temp sensors at the truck shops along with transmission temp sensors. if you go to the junk yard and ask for one you can find cars that do have them with the dip stick as the gage and the fill measuring stick and buy the gage two or go to the dealer and get on, many ways to do it your choice how you do it. Rich2914 has a good ideal since most cars don't have drain plugs you could use a pipe tee and the sender from UCANTCME web site and put it on the low side transmission line cause a plug will leak and the rear end could be put in the fill plug hole so it won't leak, many a truck i have worked on lost the sender unit and killed the third member.
Depends how big the wings are. There are already plenty of 1500 HP cars that traverse a 1/4 mile track without leaving the ground.
I settle for as authentic with county boy. You the two have a head gasket or intake gasket hardship. If in worse, you've gotten a crack to your block and the oil is going from the intake canal into your water canal. Thats why think ofyou've have been given plenty oil. yet whilst any of your gaskets are long previous, you are going to work out the equivalent. So u . s . boy's respond might desire to be first-fee to with and not extra costly. reliable achievement, Juan.
Don't know that car brand, but 'most' cars with an automatic tranny have a tranny fluid cooler built into the radiator. Look at the side tank of the radiator for two metal thin tubes going into the tank - Those would be the cooler lines. Crawl under follow the lines back to the tranny. You'll have to identify which line is the OUT which is the return. Should be able to get some tubing fittings install the temp sensor for the gage right where the line attaches to the tranny.
OK, Dude First I'm guessing your gonna alot of NOS spray lol i dont know anything about this but i think im on to something , i think if you get like 18 sprays of NOS , a bugatti veyron 16.4 and some wings your good to go! PS: THIS WAS FOR FUN 10/10 TIMES THIS WONT WORK

Share to: