Uv board directly with glue on the tile up line
Exterior wall UV color plate is a high-density fiber cement board as a substrate, the thickness of the board is generally 12mm, the use of UV light curing process on the surface of the decorative coating, coated with paint on the surface of the coating, through the UV ultraviolet light , Instant curing film, and the solid content of high hardness. Mainly used for the decoration of the external walls, good decorative, can make the decoration of the building glow with brilliant colors.
Clean the surface of the UV decorative plate and clean the excess seal.
UV board is the surface after UV treatment to protect the plate. UV paint that is UV curing paint, also known as light-induced paint. Ordinary wood, silicon calcium board and other sheet through the UV paint, and then through the UV light curing machine and the formation of the stone plate, a bright surface treatment, bright color, with a strong visual impact, wear resistance, chemical resistance, Long service life, do not change color, easy to clean, high cost of mechanical equipment and process technology requirements, is the ideal plate curing treatment process.
Installed with wall glue
1, in the wall covered with a grassroots level, commonly used is 3MM plywood, woodworking board, a good point is the fire glass magnesium board. With nails to nail them on the wall, and with a sandpaper to clean the board.
2, saw the board, the UV decorative panels according to the actual requirements of a block into a block.
3, the edge, will be installed on the four sides of the UV board with a chamfering machine down to 45 degrees angle. According to the actual installation requirements, and some just down the next two sides or three sides.
4, clean the back of the UV board, with a sandpaper and rag to clean the back of the UV board.
5, the Wan Nengjiao or wood glue evenly coated on the back of the UV decorative panels, and then flatten the UV decorative plate on the wall, and then gently hammered the UV decorative panels, so that the UV decorative board more firmly stick to the wall The
6, water transfer joints, and then fill in the two pieces of UV decorative plate 45 degrees angle intersection, first filled, and then the vertical angle of wood from the 45-degree angle at the intersection of gently across, so that the intersection It is beautiful.
UV board can be directly attached to the wall with glue.
