Home > categories > Minerals & Metallurgy > Quartz Tubes > Water heater quartz tube heating in three seconds possible?
Question:

Water heater quartz tube heating in three seconds possible?

Water heater quartz tube heating in three seconds possible?

Answer:

The carbon fiber heating body has the characteristics of rapid heating, small thermal hysteresis, uniform heating, long distance of heat radiation transmission and fast heat exchange rate. The working process of the amount of flux is far less than the electric heating metal heating tube (see table below), the electrothermal conversion efficiency as high as 95% or more (i.e. you tube, when using carbon fiber electrothermal tube only needs 700W 1000W General Electric).
High thermal efficiency, heating body is pure black carbon fiber material, in the process of electric heating conversion, visible light is very few, the electrothermal conversion efficiency reaches more than 95%, than the nickel, chromium, molybdenum and tungsten materials as the heater until the heating body, can save 30%; under the same power, than the Ni Cr metal heating tube high radiation temperature of 30 DEG C tube, 15 DEG C higher than quartz electric heating tungsten molybdenum wire. The infrared light by the human body, clothing, such as direct water absorbent, the heat transfer process in the heat loss is small; the absorption of more carbohydrates, with good carbon atom resonance effect, greatly improve the efficiency of products.
When the carbon fiber quartz electric heating tube is electrified, the power is stable within a certain tolerance range during frequent startup, shutdown and long-term continuous operation, and no momentary power shock can be generated.
Carbon fiber quartz heating tube energy emission is far infrared radiation, the infrared radiation efficiency reached more than 70%. The carbon fiber quartz electric heating tube will radiate the infrared energy that can heat the material when it is electrified. Infrared radiation wavelength of far infrared radiation heating lamp is 2.3--14 m, mainly used for high infrared heating technology, with high density, high energy, high strength of the workpiece heating radiation, suitable for the modern production technology of high yield and high quality requirements. The far infrared line spectrum of this wavelength is called "the light of life", which accounts for more than 80% of the total wavelength. At the same time, it can be absorbed by the water molecules in the air to produce resonance and friction heat effects, so as to rapidly improve the temperature of the heating environment. In particular, it can effectively activate the human tissue cells, promote blood circulation, accelerate metabolism, enhance immunity, and also has the effects of deodorization, dehumidification and antibacterial.

Share to: