What about the normal daylight tubes replaced with LED tubes, ballast and flashers?
The ballast and the regenerator are removed directly. The fire line and the zero line go straight to the poles, one side will do.
The fluorescent tube is replaced by an LED lamp tube, LED lamp tube has two kinds, one is built by the built-in drive straight up, like changing the lamp tube same The regenerator is out of the way. The other is an external drive that involves removing the ballast and the regenerator, the driver and the LED light tube
The rectifier and the regenerator can be removed, the specific installation method should be changed according to the electric way of the LED lamp tube
The rectifier usually has two types of inductance and electronic type: the direct short answer of inductance (one to one). The wire and the zero line of the electronic type (two in four) are short connected to the corresponding two sets of two lines, the regenerator is pulled directly, and the LED tube is installed.
Discarded processing, because leds can't be combined with these two electrical components, and they don't need to be combined. Leds have their own parts, including: fixed CARDS, terminals (heads), external drives and drives.
