What are end mills and what are disc cutters? What's the difference?
End mill:Used for machining grooves and stepped surfaces, etc., the cutter teeth are on the circumference and the end face and can not be fed axially. When the end mill passes through the center end teeth, it can be axially fed.Face milling cutter:Also known as disc milling machine, used in vertical milling machines, milling machines or milling machine on the surface of Longmen, the end and circumference are knife teeth, but also coarse teeth and fine teeth. The structure of the utility model is composed of 3 kinds: an integral type, a inlaid tooth type and an indexable type.Difference:The applicable processing type is different, the feed direction is different.
The end mill can be directly clamped by a chuck or a special clamp head; the disk milling cutter must be fixed on the cutter bar.
The main cutting edge of the end milling cutter is on the face of the circle, and the cutting edge on the end face is an auxiliary blade. During operation, the feed motion can not be carried out along the axial direction of the cutter. According to the national standard: the end milling cutter diameter is 2-50 millimeters, can be divided into two kinds of coarse teeth and fine teeth. Diameter 2-20 is straight handle range, diameter 14-50 is taper handle range. There are many types of disc cutters. In broad sense, there are disc milling cutters in the middle which are used for connecting and installing cutter bar holes, collectively called disc cutters
General mills is used and face milling and milling groove milling groove not to use the knife cutter is mainly keyway milling large end face because the cutter diameter is larger than the general end milling milling is generally faster and the saw blade milling cutter cutting milling milling machine for 8 years I do Oh what to ask the message I can help you to answer
