What are the common faults in the sand washing machine?
As the sand washing machine has a long service life, there are always some faults, which mainly include:1, fixed and rotor iron core troubleshooting2. bearings fault repairThe shaft is supported by the bearing and rotates, the heaviest part of the load, and the component that is easy to wear.Trouble shootingInspection during operationRolling bearing, will hear "rolling" sound; if you hear the discontinuous "Geng Geng" sound, may be bearing steel ring rupture. When the bearings are mixed with sand and other debris or bearing parts, when slight wear, it will produce slight noise.TroubleshootingThe available 00 sandpaper to erase the rust on the outer surface of the bearing, and then put into the gasoline cleaning; or bearing crack, inner and outer rings of fragmentation or bearing excessive wear, should be replaced with new bearings. When replacing the new bearing, choose the same bearing as the original model.3. rotating shaft troubleshooting
Sand washing machine is mainly used for washing machine, sand products for the removal of impurities of the machine. Sand washing machine because of its appearance and principle is different, divided into spiral sand washing machine, drum washing machine, water wheel sand washing machine, vibration sand washing machine, etc.. The sand washing machine is mainly composed of a V-belt, a reducer, a gear, an impeller, a trough and a discharging trough.
