What are the main applications and functions of compact shelves?
File shelves at the top are need to set up a dustproof plate, the main function of parts is used for placing the dust into the frame, the frame body is stored in the file cause dust dirty, but dust plate is not absolute dust, dust is a small matter, will inevitably enter into the frame, the effect is only a dustproof plate greatly reduce the dust into the frame, so the customer is slightly clean under the dust, dust using full closed shelves dustproof effect will be greater than the open cabinet.
File shelves at the bottom of each column handle position should be equipped with a braking device, when the file management personnel in the work frame, to brake rotation to the OFF position, the lock tightly set. The frame body can move, ensure the safety of personnel archives management, when the work is finished, intensive the cabinet should also be closed brake lock, to ensure the safety of the archives.
The side panel with sealing strip is larger than the width of the chassis frame width, resulting in the overall closure, chassis cracks, mouse drilling frame may cause damage, so in site archives, should be equipped with a ratguard, is closed after the cabinet gap decreases.
In addition to the front lateral column and the back column outer sealing device, the remaining number of columns are needed to install the sealing device, the sealing device referred to as seal, the seal material is equivalent to the refrigerator seal, anti-aging, tight combination, deformation effect, while allowing the closure between the frame body no collision, play a buffer role.
It should be equipped with anti hook in the lower part, in the normal operation of sliding shelves down hook and track gap, when the frame body by external force or large inertia, down through the hook on the site will force to the track, and by connecting the track and ground expansion screws to the ground, the frame does not guarantee collapsed, but the file management personnel in the use of shelves should be paid attention to, slowly shaking cabinet shake shake the wheel handle, should not be too hard or too hard, otherwise it may cause because of inertia files from the frame slide may also lead to failure of the cabinet collapsed down hook.
