Home > categories > Furniture & Décor > Other Hotel Furniture > What are the mistakes in hotel furniture maintenance?
Question:

What are the mistakes in hotel furniture maintenance?

What are the mistakes in hotel furniture maintenance?

Answer:

When the hotel furniture manufacturers of furniture suppliers want to know how these furniture materials are qualified, may wish to make a return to professional furniture will be the difference between wood and plate completely, can buy furniture for your hotel.
Next is to check the drawer slides and the latch. The drawer should be solid and tighten the screws inside. Might as well pull the drawer, the active desktop, cupboard door, make sure can be used freely, and correct connection. Finally, pay attention to the surface of the furniture, hand on the surface of the furniture, carefully check whether the smooth surface polishing, especially to avoid Taiwan feet is rough, palette is streak and the angular position of the paint is too thick coating, whether there is a crack or bubble.
When we check the safety and stability of the need to pay attention to the following matters: To observe whether the drawer or door tilt phenomenon, caused by low skew parts without a crooked eye or eyes are too large, and so the technique level of tenon. Wooden furniture to have security and stability, when the two door open after 90 degrees, with the hand gently pull forward, the cabinet can not automatically forward tipping; bookcase door of glass to the grinding processing; the mirror and dresser to install the rear panel, layering the glass surface should be fixed. Individual pieces of furniture (such as legs, drawers, cabinet doors, or brackets) must be able to hold enough. You should jog furniture corner or sitting on the side, try furniture is firm. Reverse the chairs and furniture with cushions and see how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges. Are the slats closely tied to the horizontal connections? Are there any excess glue and fillers in the seams?.
The judgement is solid wood, but how to observe the advantages and disadvantages of wood?. First of all, we need to open the furniture doors, drawers, to observe whether the wood dry, white, and whether the texture is close and delicate. If you have added particleboard, MDF and a molding board and other materials made of furniture, open the cupboard door or drawer, smell, see if there is a pungent odor.

Share to: