What are the properties and characteristics of the bentonite crusher?
The series of bentonite Hubei crusher for curved extrusion type, motor drive belt and pulley, the eccentric shaft so that the movable jaw moves up and down when the movable jaw rises elbow plate and the movable jaw angle becomes larger, so the movable jaw plate close to fixed jaw plate at the same time, the material is extruded, rubbing, grinding and other multiple broken; when the movable jaw down, elbow plate and the movable jaw angle becomes small, the movable jaw plate left jaw plate in the bar under the action of the spring, the broken material discharged from the crushing cavity, with the continuous rotation of the motor crusher Hubei periodically and crushed the discharge, to achieve mass production.
The structure of bentonite crusher main frame, eccentric shaft, pulley, flywheel, jaw, side guard plate, plate, plate, rear elbow elbow clearance adjusting screw, a reset spring, the fixed jaw and movable jaw plate etc., the elbow board also play the role of insurance.
In the process of the huge stone broken into small stones, the first crusher is usually referred to as the "main" crusher. Also the history of the longest, the most strong crusher. For jaw crusher feed, material into the crushing chamber from the top entrance. Hubei Hubei with tooth teeth to huge material to the top the chamber wall will be broken into smaller stones. Hubei support tooth movement is a eccentric shaft, the shaft through the fuselage structure. The eccentric motion usually consists of a fixed wheel at the ends of the shaft and the eccentric flywheel generated. Support bearings are often used for spherical roller bearings, the bearing working environment is extremely harsh. Bearing must be subjected to impact the large load, abrasive sewage and high temperature. Although the working environment is extremely harsh, bentonite E-breakers still need to work very reliably, it is a key link to ensure the production efficiency.
