What are the specifications for setting up fencing doors for outdoor fire passages?
The passage of fire engines require clear width and height not less than 4 meters, wires and other obstacles affect fire fighting over the width of the road cannot, but also meet the fire vehicle turning radius requirements, and can carry fire pressure.As for the iron fence gate set up on the passageway, in addition to meeting the above requirements, it should also be guaranteed to open at the first time in case of fire, which has nothing to do with the color. Compliance with the requirements, fire acceptance can be adopted.
Twenty-eighth of any unit or individual shall not damage, misappropriation or unauthorized removal, stop using fire control facilities and devices, and shall not bury, occupy or cover a fire hydrant or occupy fire prevention space, shall not be occupied, clogging evacuation routes closed, safety exit, fire channel. Doors and windows in crowded places shall not be equipped with obstructions that affect escape, fire and rescue. Twenty-ninth units responsible for the maintenance and management of public fire installations shall keep the fire fighting, water supply, fire control communication, fire control vehicle passage and other public fire fighting facilities in good condition and effective. In the construction of roads and power outages, water supply, cut off communication lines may affect the fire brigade fire rescue, the relevant units must notify the local public security organs, fire institutions.
6 fire lane 6.0.1 road within the block should consider the passage of fire engines, the distance between the center of the road should not be greater than 160.0m. When the length of the building along the street portion is greater than 150.0m or the total length is greater than 220.0m, a fire lane through the building shall be provided. When there is a problem, the ring fire lane should be provided. 6.0.2 has a closed courtyard or patio buildings, while the short side length is greater than 24.0m, the fire lane should be set to the inner courtyard or patio. 6.0.3 has a closed courtyard or patio buildings along the street, should be pedestrian streets and communicated inner courtyard (use staircase), the distance should be less than 80.0m. 6.0.4 in the fire lane across both sides of buildings or buildings into the courtyard, should not affect the security settings of the evacuation or fire truck traffic facilities. 6.0.5 more than 3000 seat stadiums, more than 2000 seat halls, and more than 3000m2 of the exhibition hall and other public buildings, should be provided with ring fire lane. Fire lane should be set up in 6.0.6 factory and warehouse area. It covers an area of more than 3000m2 a, B and C or plant covers an area of more than 1500m2 B and C warehouse, should set fire ring road, there are difficulties, two buildings along the long side set fire road. 6.0.7 combustible materials, open storage yard area, liquefied petroleum gas storage tank area, a, B, C liquid storage tank area and flammable gas storage tank area, fire control area should be provided. Fire lane should be set up in accordance with the following provisions: 1 reserves larger than table 6.0.7 requirements of the yard, storage tank area, should be equipped with ring fire lane. 2 occupies the ground...
Hello：The passage of fire engines require clear width and height not less than 4 meters, wires and other obstacles affect fire fighting over the width of the road cannot, but also meet the fire vehicle turning radius requirements, and can carry fire pressure.As for the iron fence gate set up on the passageway, in addition to meeting the above requirements, it should also be guaranteed to open at the first time in case of fire, which has nothing to do with the color. Compliance with the requirements, fire acceptance can be adopted.Clear? May be of help to you!
