Home > categories > Machinery & Equipment > Suspended Platform > What are the structural components of an electric gondola?
Question:

What are the structural components of an electric gondola?

What are the structural components of an electric gondola?

Answer:

The basket by the suspension mechanism, suspension platform, hoist, safety lock, steel wire rope, wire rope and electric box and electrical control system for main parts. For the convenience of transportation and transportation, the products are broken down by parts or groups and parts when they are transported out of the factory and assembled into the whole machine after the construction site. The suspension mechanism is installed on the top of the building work at the supports, a steel wire rope to steel structure under suspension platform, rated load weight, (see Figure two: suspension mechanism) were using two sets of suspension mechanism.
The force exerted on the building or structure by the suspension mechanism shall be in accordance with the carrying requirements of the building structure. Figure two, 2, 1 before the beam front bracket 3, inserted rod 4, 5, 6, beam beam connection sleeve 7, 8, 9, the support weight on pillar 10, strengthened steel wire rope 11, rigging screw. The suspension mechanism comprises a front beam, the middle beam and the back beam, a front bracket, on balance, strengthen the pillar, steel wire rope, plug rod, connecting sleeve and other components, before and after inserted in the beam, flexible regulation. In order to meet the requirements of work environment, by adjusting the inserting rod height to height adjusting beam before and after adjusting the height of 1.15 ~ 1.75m, front and rear bracket with roller, can be used to move the suspension mechanism, the weight of the quantity according to the corresponding model configuration.
The mounting frame is welded by a steel tube, and the bottom can be provided with casters, which is convenient for dismounting and moving during operation. The front railing and rear rail of the platform are welded by steel (aluminum) pipe, the front rail is 970mm, and the installation is on the side of the operation area, and the height of the rear rail is 1120mm. ZLP800 for elevator type LTD80, hoist by electromagnetic brake motor, centrifugal speed limit position, two speed system and the rope rolling mechanism, enhance the level second machine deceleration for gear transmission, the structure in figure 6:ZLP800 for elevator structure diagram (deceleration part). The hoist rope coiling mechanism S "form, the structure shown in figure 7:ZLP800 for elevator structure (rope part) ZLP800A, ZLP630, ZLP500 for elevator models were LTD80A, LTD63 and LTD50, three kinds of hoist structure is basically the same, by electric magnetic system alpha motor centrifugal speed limiting device and two stage deceleration system and" alpha "in the form of a rope coiling mechanism etc.. Details of the structure are shown in figures 8:ZLP800A, ZLP630 and ZLP500. The lifting machine has automatic rope feeding function, and the operator only needs to insert the work rope into the entrance of the hoist.
Hanging basket mechanism of anti overturning moment and the overturning moment ratio of not less than 2, that figure: K - G - anti overturning safety factor weight, plug rod, support quality (Kg) - F suspension platform, lifting machine, electric control system, wire rope, rated load and wind pressure value weight the sum (Kg). A - beam extension length (m) B, with emphasis to the pivot distance (m) Note: the installation can be extended length according to the structure regulation of the front and rear beams need, the beam extending distance of B should be adjusted to the maximum, before the beam length of a is usually not more than 13 meters, when the length of before the beam is greater than 1.5 meters (including 1.5 meters) or wire rope length more than 120 meters, must be reduced work load or increase the weight, in order to ensure the anti overturning safety factor K value is greater than or equal to 2. ZL, P800, ZI, P800A, the suspension platform of 630500 model basket are assembled platform. The assembled platform is composed of front railing, back railing, underframe and mounting frame. Each component is bolted and its standard section length is 2.5 meters or 2 meters. The underframe of the assembled platform is welded by steel (aluminum) plate, and the bottom plate has anti slip corrugation

Share to: