What are the technical requirements of the vibration screen installation?
First of all, to be firmly installed base, withstand static and dynamic vibration load; second, the installation platform must try to keep the level, if you need the difference, steel pad to the horizontal position the motor mounting base should pay attention to the bending of the sheet around about 150mm; finally, the test run to have noise.
Inlet and outlet, dust discharge and impurity discharge port and discharging chute, impurity discharge pipe, using soft connection pipeline, the gap in the vertical direction, not less than 20ram, and the connection part of the hose with length not less than 60ram. Some assembly boat clasp with tight hose.
The inclination angle of the screen shall meet the requirements of the drawing, and the deviation shall not be greater than + 0.5.. The installation angle of the sieve body suspension boom shall comply with the requirements of the drawing, and the deviation shall not be greater than + 0.5.
The horizontal levelness of the vibrating screen is 1mm/m.
Before installing the vibrating screen, the screen surface shall be checked whether it is intact or not, whether the screen surface is tight, whether the connecting parts are loose or not, whether there is grease in the bearings and whether the nozzle is unblocked or not.
