What can the marble sawing blade
Sawing marble without grit, there is no need to leave the slots or holes punched in the blade, so it does not need to study the blade groove and hole like that of granite saw blade. The diamond has the largest hardness, but is relatively brittle, resistant to friction and resistant to collision. Therefore, the diamond frame saw for sawing marble can only adopt a translational motion mode, and can not be swing motion.
The diamond cutter head is inlaid in the lower edge of the plate, according to the length of the saw blade, the cutter head number decision, can be up to 45. In the mosaic, be careful not to let the knife top distance arrangement, this can reduce the vibration of saw blade, make the saw more stable operation.
The length of diamond saw blade varies with the size of the saw, and 4300mm, 4350mm and 4400mm are more common. Its width is 188.smm (including diamond cutter head) and the thickness of saw blade is 3.smm. Diamond cutter head shape is square cone (cross section is trapezoidal), long as 20mm, high 8.smm, the upper and lower width, the width of the upper part of 4.7MM, the lower part of the width of 5.7mm. The reason for taking a narrow, wide shape is to prevent 4350mm stone plate clamping blade.
The diamond saw blade commonly used for sawing marble is a saw blade made of a diamond cutter head embedded in a special steel plate. Diamond cutter head and marble friction, can put the marble blocks cut.
