What cleaning agent does the anti rust oil on the lift rail be cleaned with?
Rinse with acetone and dry with cotton cloth.
In fact, there is no need to clean up! Just wipe it with a rag! What's the use of cleaning? Clean, also have to brush!
Machinery clean method - this method is preliminary disposal (the first oil), usually in other ways difficult to dispose of time, explore this method. For example, parts after mechanical grinding or polishing, in its hole and slot is reserved in the solid or sticky polishing paste film (linseed oil or soybean oil), this situation in this way can reach a good orange fruit. This method is to use alkali or push, also Soda Lime wet cloth wipe, and then use other oil removal method. If it is a small part of the batch to the oil, can be in the shade of the drum, take the appropriate amount of lye to deal with.Two, solvent degreasing - ting method is also a pre disposal method (first go to the oil). Are a lot of lubricating oil or grease, in polishing paste, need to use this way to oil, and other methods (chemical or electrochemical degreasing degreasing) for final oil, it can knock short oil time in alkaline solution only after.
Usually have lubricating oil, why should be cleared? If the rail is dirty, affecting the smooth running, you can use a cloth dipped in kerosene cleaning, but pay attention to safety, fire protection, and after finishing to re oiling
