What do you mean by the center spacing of the load on an electric forklift?
The center of load is the center point of a forklift truck. Generally refers to the center of the length of the goods. General forklift pallet fork length of 1.22 meters, then load center on 610 mm, length is 3 meters of the goods if you, the center of the goods on 1.5 m, with 1.22 m goods fork is certainly not possible
Load center distance In short, it means the center of gravity of the cargo. For example, the length of the fork is one meter, and the center of the load is half a meter away. In turn, the 1.8-meter-long cargo fork, the center of the payload is 0.9 meters away. It is dangerous to use a one-meter fork fork, which is 1.8 meters long, and the center of mass of the cargo is at 0.9 meters. It's likely to fall!
For a balanced electric forklift or a battery-powered stacking, a little extra weight or the center of mass of the cargo is not a problem in front of the load center. I said a little bit. But for stacker, because be stacker itself weight is light, so if you exceed and load or the goods promotion center migration, is likely to cause instability and collapse! So you need extra attention when you're using a stack. In particular, a semi-electric truck and a manual hydraulic stack. Because the body itself weighs less than two hundred kilograms, it would be too dangerous to raise a ton or two tons of goods, plus a central shift.
This principle is like the weight of a scale, but the weight of the lead is small, but it can be weighed up to a thousand jin, because its torque is longer. The same principle applies to electric stacking. Because most electric stacking vehicles are supported, that is, the legs are supported under the fork. Such a design could extend the fulcrum of the vehicle forward and, at the same time, reduce the size and weight of the body.
Another thing is that electric forklifts are generally balanced, which is used to boost goods. The standard three-ton electric forklift, for example, is fitted with a 1070mm cargo fork, and its payload center is about half the length of the fork, which is 535mm. If the length of the goods is within 1070, there is no problem of lifting the three tons of goods. But if the goods length is 1.6 meters, so the location of the center of the goods is in 0.8 meters, so beyond the electric forklift truck loading the position of the center distance of 0.535 meters, 26.5 cm, according to the lever principle, by this time if you have any 3 tons goods, so use this 3 tons of electric forklift is exhausting. It is possible that the rear portion of the electric forklift is lifted by the weight of the cargo.
