What do you need to install a door closer?
Hidden Installation: This installation method for hidden door closers, the general door closers installed on the door, slide installed in the door frame. Door closers can be on both sides of the door. Compared with the first three installation methods, this installation method to minimize the closing force.
After installation in this way, the door in the closed state, there is no exposed parts, so the most beautiful. This installation is the most complex, it is best to need a professional to install.
This installation requires a large gap between the door and the door frame, usually 10mm (or the installation of the door to remove the material, increase the gap). The thickness of the door exceeds 42mm.
Parallel installation: The door closer is mounted on the door and the parallel plate is mounted on the door frame. And the door closer is mounted on the door side. This installation method is suitable for the door frame is very narrow, or almost no door frame.
In accordance with this way after installation, because there is no prominent connecting rod and rocker, so more beautiful. Compared with the standard installation, this installation method is suitable for opening doors such as walls and other obstacles. This type of installation is less closed.
Door frame installation: Door closers installed in the door frame, the seat installed on the door, and the door closer to the door. This installation method is suitable for wide door frame, there is enough space to install the door closer.Compared with the standard installation, this installation method is suitable for opening doors such as walls and other obstacles. This type of installation has a greater closing force and is suitable for larger and heavier doors.
Standard installation: the door closet is mounted on the door, the stand is mounted on the door frame, and the door closet is mounted on the sliding door side. This installation is suitable for the door frame is narrow, there is not enough space to install the door closer. Applicable to the direction of the door without obstacles, the door open to a large enough angle, the door closers will not hit the foreign objects.
Closed door installation method
1, usually with the door closer to provide instructions for the installation of the model, so first read the instructions, according to the direction of the door, the size of the closing force and the door closer, the connection between the seat and the door hinge to determine the installation location.
2, according to the requirements of the size of the closing force, by reversing the connecting seat 180 ° or change the connection between the connecting rod and the connection between the seat position, can change the closing force. Adjust the distance between the connecting rod and the hinge centerline of the door, the smaller the closing force of the door closer, the greater the strength.
3, according to the installation model on the location of the instructions to determine the location of the installation screw, and then drilling, tapping.
4, with a screw to install the door closer.
5, the installation of fixed connector.
6. Install the drive plate with screws.
7, adjust the adjustment lever to the door frame into 90 °, and then connect the connecting rod and drive board connected together.
8, do not forget to install a plastic cover, it can be used to catch the closed door leakage of hydraulic oil.
9, after installation, check the fixed screw is fastened, no loose or not strong phenomenon. Open the door to the maximum door position, check whether the hinge arm of the door closer is rubbed or rubbed against the door or door frame.
