What does the color of the set-top box TV connection mean?
(two) surf the Internet quicklyNow you just need to take the wireless keyboard, sitting comfortably in the sofa (with the set-top box to be separated by 5 meters), ready to start the journey of the world tour network. First, dial the Internet - remote control, a key to the internet. Use your hands specifically set up network function of the wireless keyboard button, "Lenovo FM", "electronic mail", "search" and "online service", with just one click, you can directly enter the user needs the level of network users and the network close at hand. Did you hear the crisp sound? Congratulations you have entered the fascinating Internet (Internet)! On the keyboard, press the number key to enter the Internet channel, according to the channel number, you can achieve the choice of content, so that users like remote control TV as easy and comfortable access to the Internet, browse, send and receive e-mail.Three, Cable Modem installation guide(1) hardware installation1. basic accessoriesCable Modem (a), (a) transformer and a power plug (a), Hub (a), Ethernet 10BASE-T (a card, preferably PCI) and a disk drive, 2 meters (Coaxial Cable two, BNC has made joint) and 8 meters (a Ethernet UTP Cable ready, RJ45 connector), UTP Cable (two to Ethernet in length, ready RJ45 connector).2. install the network cardIf you do not have an instruction manual for your network card, you can refer to the installation steps here.(1) turn off the computer power and turn on the main computer cover.(2) the network card is installed on the empty slot (PCI).(3) close the lid and turn on the computer.(4) after entering Windows, the system prompts you to find the new hardware, and you can install the driver of the network card. To see if the installation is successful, you can go to the "network" in the "control panel" to see if there is "XXX Ethernet"". If yes, it means that your Network Card installation has been successful.
As long as you are using digital TV, and open the interactive radio and television business, you can access the internet. Generally speaking, set-top boxes are connected to the internal network of TV stations and are not connected to the outside network. Otherwise, there will be very serious security problems1. component list:Set top box host, stabilized voltage power supply, remote control keyboard, audio / video output line, telephone line or cable television network line (here only introduces cable television network line).2. installation methodOnly the above-mentioned device is connected with the set-top box host computer, and the back of the set-top box is provided with detailed Chinese explanations. Here, let me introduce to:Telephone access: it is to connect the telephone line of your original telephone to this port.Connect the telephone port: connect one of the randomly equipped telephone lines to your telephone, and the other end to the port. In this way, you do not use set-top boxes on the Internet, you can, as usual, direct use of the phone to make calls.Audio / video output: the random audio line is inserted into the port of the TV set and the set-top box according to the colors.(Note: red and white lines represent the left and right channel lines of the audio. The yellow line represents the video link. )S terminals: in view of the current new TV sets. If your TV comes with this feature, you can use a S terminal line instead of audio and video lines.Power interface: Needless to say, as with other home appliances, is a regulated power supply is connected with the interface.We will also use the Ethernet Ethernet (Cable) connected from the Cable Modem through the RJ45 interface and the set-top box at the back of the 10/100M BaseT Ethernet connection (followed by the Cable Modem installation instructions in detail).OK, connect, open the power button at the front of the set-top box, turn on the TV, and move on to the next step.
Colors are easy to distinguish. The average yellow represents the video line, the red white insert the left and right audio.
4. build LANIf you want to set up LAN, the specific formation of a lot of articles, here is not explained in detail.Four, computer software settings1. Windows98 network settingsIn Windows98, press start, > Settings > control panel". Select "network", then select "TCP/IP - > xxx xxx Ethernet", click "properties" (Figure 7). Select the "IP address" - "automatically acquire the IP address", and then select "WINS configuration" - "enable WINS parsing" - "use DHCP for WINS resolution", and then restart your computer after determination.2. Internet Explorer settingsOpen IE 5.5, select Tools > Internet Options > connection > local network settings, and select use auto detect settings".Here, so the basic installation settings have been completed, we can simultaneously use computers and TV to surf the Internet world, and truly enjoy broadband Internet surfing. This to show that not every one can also use the Internet computer and television, so in practice, if in a way we use the Internet, you can use HUB only in accordance with the first branch in Figure 6 or second branches can be.To set up the corresponding account and password to the set-top box, and the broadband dial-up account password is not the same, you have to use Telecom IPTV, to get to the local telecommunications operators, or let the computer to provide on-site service, which is free,I like my side is a telecommunications network +IPTV is TV, we're going to the room to do data, cost me 40 yuan for 1 months, IPTV 23 can go online at the same time watching TV, if the card can improve the speed.
