What does wireless relay mode mean in routers?
1 、 the wireless relay mode in routers refers to the routing function of shutting down routers, and routers act as repeaters for wireless network signals only.2, router wireless relay mode setting method is as follows,
Set up a wireless router (1), computer connected to a wireless router: a wireless network is enabled by default wireless router, and the password is not set, so the computer's IP address, can be connected to the router with the computer through the wireless way. Scan the wireless network with the computer's wireless network card, and then click the connection when you find the wireless network name of the router. (2) login TL-WR700N management interface: enter "192.168.1.1" in the browser, enter the login account number and password admin/admin, open the management interface of the router. (3): run the setup wizard, click on the left side of the "Wizard" -- > "next". (4) the work mode selection: select the "Repeater mode" -- > "next" interface settings in the work mode, (5), wireless settings: click "scan", find the higher the router SSID (recorded in the first step, and then click "connect)". Set with the router TL-WR941N the same encryption and password - > "next" (6), click the "reset", TL-WR700N will automatically restart, restart after completion, just set to go.
Set the IP address of the computer, the router in AP mode is not enabled by default DHCP service, so can not give the computer automatically assign IP addresses, so users need to manually set the IP address of a computer, to be able to log in the router management interface. Only need to set the IP address and subnet mask, IP address is set to 192.168.1.X (1<X<252): 255.255.255.0, subnet mask, default gateway and DNS server address without setting, note: this setting is notebook computer wireless network card IP address.
First of all, you should know the wireless router A wireless network name (SSID), wireless cryptography, encryption, channel, MAC address and other information, this information will be used in subsequent settings process. Check method: login A wireless router management interface - > click "running" -- > "wireless equipment view state, write down the wireless network SSID number (in this case TP-LINK_2026BC) and wireless state MAC address (in this case E0-05-C5-20-26-BC), click on the" wireless set "-- >" wireless security settings, and then check the wireless encryption and PSK password, and recorded.
