How to set up the tplink router's repeater?
Click next, OK and restart the router, set up, set up, computer wireless network connection will automatically disconnect the Pulian router B is the amplification of Pulian relay router A, computer search Pulian router B SSID is A SSID, and the network set up WPA-PSK/WPA2-PSK wireless security, at this time re connect to the router B pulian.The Tp-link router relay mode after setting the signal SSID and encryption method of wireless signal and the main routing router from the B is the same, so in the environment of the formation of the relay, wherever you are, can connect to the Internet router.
1, using the Tp-link router B default DHCP server is not opened in AP mode, not for the computer to automatically assign IP addresses, so also need to configure the computer wireless network connection IP address, can log into the router management interface, or the wired connection, the computer wireless network connection IP address is set to 192.168.1.X, subnet mask settings: 255.255.255.0, setup is complete, click OK to take effect.2, connect to the router in the IE browser, enter the 192.168.1.253, enter the default login account and password admin Pulian, open B router management interface.
The Tp-link router A is already connected to the upper and outer network. We want to set it as follows1, SSID: the name of the wireless network, enter the A Pulian router management interface, you can view the wireless network SSID and MAC address in the running state, this is we want to use.2, wireless encryption: Here we use encryption WPA-PSK/WPA2-PSK encryption algorithm, AES, click on the wireless settings - wireless security settings, you can set the PSK password, remember it, this is to use the following.
