What equipment for spherical roller bearing 24018CA
When the bearings are matched with the conical shaft, the inner ring moves along the axial direction, so that the radial clearance of the bearing can be adjusted.Spherical roller bearings rear code:Will rear code for tapered bore spherical roller bearing K, K30, installed in the tight match set to cover on the rear code for K+H type and K30+H type bearing. This type of bearing can be mounted on an optical axis without a shoulder shaft, and is suitable for occasions requiring mounting and dismounting of bearings. In order to improve the lubrication performance of bearings, there are annular oil grooves in the outer ring of bearings, and three oil holes with uniform distribution are drilled. The rear code is W33.
The raceway of the bearing outer race is spherical shape, so the self-aligning performance is good, and the coaxiality error can be compensated.Spherical roller bearing type:Spherical roller bearings are divided into: cylindrical hole, tapered bore.Hole taper cone respectively of 1:12 rear code for K spherical roller bearing (153000 or 113000) and the 1:30 rear code for K30 spherical roller bearing.
Brief introduction of spherical roller bearing:Spherical roller bearing with two rollers, the main path a load to bear, but also can withstand axial load in either direction. With high radial load capacity, especially for heavy load or vibration load, but can not withstand pure axial load.
